Anritsu ML2430A Manuale Utente Scaricare il pdf (Pagina 137)

val:

Remarks:

Sets the high limit. The HLIMS command turns the limits on and off. It is

not necessary to enter the units as the limit value is checked against the

displayed value. Therefore, if the limits have been set for –10 dBm (HLIM

1, –10) and the display units are subsequently changed from dBm to

Watts, the system will still check for the reading to rise above –10, even

though the display units type has been changed.

Example:

The high limit is set to –10dBm and turned ON. The display is in dBm. A

reading of –9.500dBm would pass. If the display is subsequently changed

to Watts, a reading of 112.2mW would fail, because the DISPLAYED value

is higher than –10. Limit checking only uses the displayed value and does

not change its value even though the display units have changed.

Commands:

HLIMS

Query:

HLIM? <c>

Returned

String:

HLIM <c>,<val>

HLIMS Turn on/off High limits

CHANNEL

Syntax:

HLIMS <c>,<state>

1 or 2

state:

ON or OFF

Remarks:

The HLIMS command turns the limits on and off.

Commands:

HLIM

Query:

HLIMS? <c>

Returned

String:

HLIMS <c>,<state>

HOLD Graph hold

CHANNEL

6-50 ML2430A OM

ML24XXA NATIVE COMMANDS GPIB OPERATION

Units Min Max

dBm –99.99 +99.99

dBmV –53.00 147.00

dBµV

7.00 207.00

Watts 0.0 50.0

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 270 271

Commenti su questo manuale

Nessun commento

Anritsu ML2430A Manuale Utente Pagina 137

Commenti su questo manuale

Prodotti e manuali riguardandi Misurazione, test & controllo Anritsu ML2430A